Aluminium and aluminium alloys · Сплав AW-5454 - 3.3537
Aluminum alloy AW-5454 (3.3537): expert analysis of properties and characteristics
Technical characteristics of aluminum alloy AW-5454
| Standard | Parameter | Value |
|---|
| Area of application | EN 573-3 — regulates the chemical composition and nomenclature of wrought aluminum alloys for industrial use. | AW-5454 alloy is actively used in the production of high-responsibility semi-finished products, including tubular rolled products, bars, sheet products and structural elements intended for operation in aggressive environments. Its unique properties ensure reliability and durability in complex conditions. |
|---|
| Area of application | EN 573-3 — regulates the chemical composition and nomenclature of wrought aluminum alloys for industrial use. | AW-5454 alloy is actively used in the production of high-responsibility semi-finished products, including tubular rolled products, bars, sheet products and structural elements intended for operation in aggressive environments. Its unique properties ensure reliability and durability in complex conditions. |
|---|
| International marking | EN 573-3 — regulates the chemical composition and nomenclature of wrought aluminum alloys for industrial use. | European standards |
|---|
| International marking | EN 573-3 — regulates the chemical composition and nomenclature of wrought aluminum alloys for industrial use. | AlMg3Mn, 3.3537 |
|---|
Chemical composition of AW-5454 alloy (in percentages)
| Cr | Parameter | Value |
|---|
| 0.05-0.20 | Cu | <0.10 |
|---|
| 0.05-0.20 | Fe | <0.40 |
|---|
| 0.05-0.20 | Mg | 2.4-3.0 |
|---|
| 0.05-0.20 | Mn | 0.5-1.0 |
|---|
| 0.05-0.20 | Si | <0.25 |
|---|
| 0.05-0.20 | Ti | <0.20 |
|---|
| 0.05-0.20 | Zn | <0.25 |
|---|
| 0.05-0.20 | Others | <0.15 |
|---|
| 0.05-0.20 | Al | Base |
|---|
Mechanical properties of AW-5454 alloy
| Material condition | Parameter | Value |
|---|
| Tensile strength (Rm), MPa | Material condition | Tensile strength (Rm), MPa |
|---|
| Tensile strength (Rm), MPa | H111 | 200-275 |
|---|
| Yield strength (Rp0.2), N/mm² | Material condition | Yield strength (Rp0.2), N/mm² |
|---|
| Yield strength (Rp0.2), N/mm² | H111 | 85 |
|---|
| Elongation, % | Material condition | Elongation, % |
|---|
| Elongation, % | H111 | 18 |
|---|
| Brinell hardness (HB), max. | Material condition | Brinell hardness (HB), max. |
|---|
| Brinell hardness (HB), max. | H111 | 60 |
|---|
| Coefficient of thermal expansion, µm/m·°C | Material condition | Coefficient of thermal expansion, µm/m·°C |
|---|
| Coefficient of thermal expansion, µm/m·°C | H111 | 24.0 |
|---|
| Thermal conductivity, W/m·K | Material condition | Thermal conductivity, W/m·K |
|---|
| Thermal conductivity, W/m·K | H111 | 130 |
|---|
| Electrical resistance, Ohm·mm²/m | Material condition | Electrical resistance, Ohm·mm²/m |
|---|
| Electrical resistance, Ohm·mm²/m | H111 | 0.034 |
|---|
Physical parameters
The density of aluminum alloy AW-5454 is 2.7 kg/dm³. This parameter is critical for calculating the mass of structures and logistical planning.
Analogues and international equivalents of AW-5454 alloy
| USA (ASTM) | Parameter | Value |
|---|
| Germany (DIN) | A95454, AA5454 | AlMg2,7Mn |
|---|
| Japan (JIS) | A95454, AA5454 | 5454 |
|---|
| Russia (GOST) | A95454, AA5454 | AMg2 |
|---|
