Aluminium and aluminium alloys · Сплав AW-5005

Aluminum Alloy AW-5005 (AlMg1): Technical Specification and Properties

Engineering and Technical Parameters of Aluminum Alloy AW-5005 (AlMg1)

StandardApplicationEuropean Analog (EN)
EN 573-3: This European standard defines the chemical composition and supply forms of wrought aluminum alloys, including AW-5005.Key areas of application: Production of semi-finished products obtained by forging, as well as tubes, rods, and sheet metal, where high decorative and protective properties of the anodized layer are critically important. The alloy is in demand in architecture, instrument making, and for creating consumer goods.AlMg1
EN 573-3: This European standard defines the chemical composition and supply forms of wrought aluminum alloys, including AW-5005.Key areas of application: Production of semi-finished products obtained by forging, as well as tubes, rods, and sheet metal, where high decorative and protective properties of the anodized layer are critically important. The alloy is in demand in architecture, instrument making, and for creating consumer goods.AlMg1

Chemical composition of AW-5005 alloy according to EN 573-3 (%)

Cr<0,10
Cu<0,2
Fe<0,70
Mg0,5-1,1
Mn<0,2
Si<0,25
Zn<0,25
Other elements<0,15
AlBalance

Mechanical properties of AW-5005 alloy in H14 (strain hardened) condition

ParameterTensile Strength (Rm), MPaYield Strength (Rp0.2), N/mm²Elongation (A), %Brinell Hardness (HB), max.Modulus of Elasticity, MPaThermal Conductivity, W/mKElectrical Resistivity, Ωmm²/m
ParameterTensile Strength (Rm), MPaYield Strength (Rp0.2), N/mm²Elongation (A), %Brinell Hardness (HB), max.Modulus of Elasticity, MPaThermal Conductivity, W/mKElectrical Resistivity, Ωmm²/m
Value145160114869 5002010,033

Physical constants of AW-5005 alloy

The physical density of the material is 2.7 g/cm³ (2700 kg/m³). This indicator makes AW-5005 alloy a preferred choice for designing lightweight structures in automotive engineering, architectural solutions, and the production of consumer electronics, where reducing the product's mass is a critical factor.

Cross-reference and analogs of AW-5005 alloy according to international standards

USA (ASTM)Germany (DIN)Japan (JIS)Russia (GOST)
A95005, AA5005AlMg1(C)5005AMg1