DIN 2097
Technical specifications and scope of the DIN 2097 standard The DIN 2097 standard regulates the production of cold-formed cylindrical helical tension springs made from patented high-strength or tempered round wire with a diameter of up to 17 mm. The technological capabilities of EV Group China allow for strict adherence to these standards to ensure the […]
DIN 2098
Attention: The DIN 2098 standard has been officially moved to archived status (withdrawn). Technical regulations and scope This normative document regulates the geometric parameters and technical requirements for cylindrical compression springs manufactured by cold forming from round wire with a diameter of 0.5 mm or more. The products are characterized by a uniform coil pitch […]
DIN 17175
Attention: The DIN 17175 standard has been officially withdrawn and replaced by the current European standard EN 10216-2. Technical Regulations and Scope of Application This standard specifies the technical delivery conditions for seamless tubes, including collector system elements, made of heat-resistant steel grades listed in the table below. Products complying with these requirements are intended […]
DIN 1629
Important note: The DIN 1629 standard has been officially replaced by the current European regulation EN 10216-1. Scope of application for seamless pipes according to DIN 1629 This standard document defines the technical delivery conditions for seamless circular pipes made of non-alloy steels, the list of which is presented in the table below. This type […]
DIN 17458
Attention: The DIN 17458 standard has been updated and replaced by the European regulation EN 10216-5. Scope of Application The DIN 17458 technical regulation sets strict requirements for the production of seamless circular tubes made of austenitic stainless steel grades. These products, supplied by EV Group China, are intended for use in critical components of […]
DIN 17100
The DIN 17100 standard has been officially updated and replaced by the EN 10222-1 and EN 10025-1 standards. Scope of structural steels This standard specifies technical requirements for a wide range of metal products, including sections, I-beams with parallel flange faces, structural steels, wire rod, hot-rolled flat products (sheets, strips, wide flats), as well as […]
DIN 17102
Attention: The DIN 17102 standard has been officially replaced by the current industry standard EN 10025-1. Technical specifications and scope of DIN 17102 This standard specifies requirements for hot-rolled steel products made of fine-grained structural steels optimized for welding. The products include sheet metal, strips, wide flats, as well as bar and section steel. The […]
DIN 17456
The DIN 17456 standard has been officially replaced by the current EN 10297-2 regulation. Technical aspects and scope of DIN 17456 The German standard DIN 17456 establishes technical delivery conditions for seamless circular pipes for general purposes, made from corrosion-resistant ferritic, martensitic, and austenitic steel grades. Specialists at EV Group China note that this type […]
DIN 17440
Attention: The DIN 17440 standard has been officially superseded by the current European regulation EN 10088-2. Scope of application and technical standards This specification defines the technical delivery conditions for stainless steel wire for general purposes. When fulfilling metal product supply orders, EV Group China adheres to the requirements of this standard, as well as […]